Sveiki, man pašlaik ir problēmas ar manu tdp-5 tablešu presi, pašlaik es presēju mdma/ektazi tabletes, manas problēmas ir tādas, ka dažas tabletes iznāk labi, bet 10 iznāk labi, tad 10 iznāk sabojātas vai salauztas, es izmēģināju visu, sākot ar dažādiem maisījumiem un beidzot ar mašīnas regulēšanu, un domāju, vai varbūt problēma ir pārāk liels mitrums telpā, kas izraisa sablīvēšanos iekrāvējā, un būtu ļoti pateicīga par palīdzību.
Kādus maisījumus jūs izmantojāt? Kā jūs to sajaucāt ar savu mdma? Vai jūs pareizi žāvējāt savu mdma? Kādas attiecības jūs mēģinājāt presēt bez mdma? Lai izpētītu problēmu, ir nepieciešams daudz vairāk informācijas.
Tas ir tāpat kā: man ir mašīna, ielej tajā degvielu, vienu dienu tā darbojas labi, nākamajā dienā ne... Kāda ir problēma...
Tas ir tāpat kā: man ir mašīna, ielej tajā degvielu, vienu dienu tā darbojas labi, nākamajā dienā ne... Kāda ir problēma...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.