Bonjour, j'ai des problèmes avec mon presse-pilule tdp-5, je presse actuellement des pilules de mdma/ectasy, mon problème est que certaines pilules sortent bien, j'en ai 10 qui sortent bien et 10 qui sortent abîmées ou cassées, j'ai tout essayé, des différents mélanges au réglage de la machine, je me demande si le problème n'est pas l'humidité de la pièce qui est trop élevée et qui provoque des agglomérations à l'intérieur du chargeur, de l'aide serait grandement appréciée.
Quels mélanges avez-vous utilisés ? Comment les avez-vous mélangés à votre mdma ? Avez-vous séché votre mdma correctement ? Quel rapport avez-vous essayé de presser sans mdma ? Etc etc... il faut beaucoup plus d'informations pour étudier le problème.
C'est comme : j'ai une voiture, je mets de l'essence dedans, un jour elle marche bien, le lendemain non... quel est le problème...
C'est comme : j'ai une voiture, je mets de l'essence dedans, un jour elle marche bien, le lendemain non... quel est le problème...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.