Hallo im derzeit Probleme mit meinem tdp-5 Pille Presse im derzeit Pressen mdma/ectasy Pillen mein Problem im läuft in ist einige Pillen kommen aus fein ill haben wie 10 kommen aus fein dann 10 kommen aus durcheinander oder gebrochen ive versucht alles aus verschiedenen Mischungen zur Anpassung der Maschine im frage mich, ob vielleicht das Problem ist die Luftfeuchtigkeit im Raum zu hoch ist und verursacht Verklumpung innerhalb der Lader und Hilfe wäre sehr zu schätzen
Welche Mischungen haben Sie verwendet? Wie haben Sie sie mit Ihrem mdma gemischt? Haben Sie Ihr mdma richtig getrocknet? In welchem Verhältnis hast du versucht, ohne mdma zu pressen? Etc etc. brauchen eine Menge mehr Informationen, um das Problem zu untersuchen.
Das ist wie: ich habe ein Auto, setzen Kraftstoff in es, einen Tag läuft es gut, am nächsten Tag nicht... was ist das Problem...
Das ist wie: ich habe ein Auto, setzen Kraftstoff in es, einen Tag läuft es gut, am nächsten Tag nicht... was ist das Problem...
HI everyone im new to pill pressing i havent even started im lloking to make xtc pills do you guys know a recipe can i buy binding agent online i saw one it has all the mixes with color too , how much mdma should i mix with the binder ,p.s( example 10 GR mdma how many pills can it make ) best regards
i have experience using a tdp1..5
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
msm is a great filler mixed with a small amount of micreocrystaline cellulose
you will need to make a batch of powder up without any active chem in it
make sure to set the bottom die setting so it presses to the bottom of the press and not on the cam at the top or it will break the machine
you will need to adjust the main punch out a bit and roll the machine by hand fairly hard so it stops on the pill...then adjust by hand the screw out so it will just keep rolling...this is to set the machine for maximum compression...there are vids how to do this on youtube
then you can weigh the pill that has been pressed and do your maths how much of your binder and active chem ratio needs to be
I had same thing happened when I was a beginner for pressing pills.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.
the only the matter is the compounding agent and your ratio for mixture of MDMA and the compounding agent.
Let me know your ratio of this compounding agent and active ingredient that you have and I will help you out to solve this issues.